
There are several options for removing popcorn ceilings. The most common way to get rid of the texture is to use a scraper. This can be messy and time-consuming. Another option is to sand down the ceiling. The results might not be as impressive. This could be a poor option, depending on how the ceiling is.
You can rent a drywall-sander. To avoid dust inhalation, ensure you have protective eyewear and a dust shield. You should also be sure to ventilate the room well. You should test the sander on a small section of the ceiling first. You should not sand the entire ceiling as this can cause water damage.
While it may be messy and more time-consuming than scraping, sanding a ceiling can be easier than scraping. Sanding will not remove as much texture. You can still achieve better results using a coarser grade of grit.

If you are unsure whether you can do this, it's best to consult a professional. They can give you more information about sanding or painting. Asbestos in popcorn finishes can cause lung cancer if inhaled. Check the ceiling for lead paint or asbestos to prevent this. You can purchase a test kit at your local hardware store. You can also consult an asbestos expert to test.
A sander is a good tool to remove popcorn ceilings. However, sanding will not completely remove any texture that might have been painted. You'll need a different method of getting rid of the texture.
The process can be both time-consuming as well as costly. It might not be possible to hire a contractor, if that is the case. Although this may cost you between $1,000 and $2000, it will save you a lot of stress and hassle.
Sanding a popcorn ceiling has several benefits, especially when cleaning up the mess. You won't have to worry about tracking the popcorn around the house and the dust won't be as noticeable. Plus, you won't have to re-apply multiple coats of paint. A sanding sander will allow you to smoothen any rough edges and dings.

You can choose to sand it or scrape it off. However, you should cover the area with plastic sheets. This will protect the paper from stains. You should cover the whole room. If you don't have enough space, painter's tape can be used to secure the plastic.
It is possible to have sections of the ceiling replaced depending on how damaged popcorn has caused. After scraping and sanding the ceiling you will need to apply thin layers of joint compound. Let it dry overnight. Next, use a drywall knife to smooth the ceiling.
FAQ
Is it better to hire either a general or subcontractor?
Hiring a general contractor is usually more expensive than hiring a subcontractor. A general contractor often has many workers, which means they can charge their clients more for labor. A subcontractor on the other side only employs one person, so he/she charges less per-hour.
Do I need an architect or builder to help me?
It may be simpler to hire someone to help you renovate your home. You can hire an architect to help you design the perfect home.
How do you sell your house quickly and without the need to pay realtor fees
Start looking for buyers right away if your goal is to sell quickly. This means that you should be willing to accept whatever price the buyer offers. Waiting too long can lead to losing out on buyers.
Statistics
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
- They'll usually lend up to 90% of your home's "as-completed" value, but no more than $424,100 in most locales or $636,150 in high-cost areas. (kiplinger.com)
- According to the National Association of the Remodeling Industry's 2019 remodeling impact report , realtors estimate that homeowners can recover 59% of the cost of a complete kitchen renovation if they sell their home. (bhg.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
External Links
How To
How can I plan a complete house remodel?
Planning a home remodel takes planning and research. Before you start your project, there are many factors to consider. The first thing you need to decide is what kind of home improvement you want to make. You can choose from a variety of categories, such as kitchen or bathroom, bedroom, living space, or living room. Once you know which category you would like to work on, you'll need to figure out how much money you have available to spend on your project. If you have never worked on homes, it is best to budget at most $5,000 per room. If you have some experience, then you might be able to get away with less than this amount.
Once you have established how much you are able to afford, you will have to decide on how big a job to do. If your budget only allows for a small renovation of your kitchen, you will be unable to paint the walls, replace the flooring or install countertops. However, if enough money is available to complete a kitchen renovation, you should be able handle most things.
The next step is to find a contractor who specializes in the type of project you want to take on. You will be able to get great results and avoid a lot more headaches down in the future. You should begin gathering materials and supplies after you've found a competent contractor. Depending on the project's size, you may have to buy all of the materials from scratch. However, there are plenty of stores that sell pre-made items so you shouldn't have too much trouble finding everything you need.
After you've gathered all the supplies you need, it's time to begin making plans. To begin, draw a sketch of where you would like to place furniture or appliances. The next step is to design the layout of the rooms. Remember to leave enough space for outlets and plumbing. You should also place the most frequently used areas closest to the front door, so visitors have easy access. Finally, you'll finish your design by deciding on colors and finishes. To save money and keep your budget low, you should stick to neutral tones.
Now that your plan is complete, it's time you start building! Before you start any construction, be sure to check the local codes. Some cities require permits while others allow homeowners to build without one. To begin construction you will first need to take down all walls and floors. Next, you'll need to lay plywood sheets in order to protect your new floors. Next, you'll attach the wood pieces to the frame of your cabinets. You will attach doors or windows to the frame.
When you're done, you'll still have a few finishing touches to do. Covering exposed pipes and wires is one example. To do this, you'll use plastic sheeting and tape. Mirrors and pictures can also be hung. Make sure to keep your work area neat and tidy.
This guide will show you how to create a functional, beautiful home. It will also save you a lot of money. You now have the knowledge to plan a complete house remodel.