A recessed light is an inconspicuous fixture that casts light downward, illuminating the whole room. Reticular lighting can be used in new construction as well as during remodeling. You can consult a professional to help you plan your recessed lighting installation if you're not a seasoned electrician.
Drywall Hanging Cabinets
The easiest way to hang cabinets on drywall is by using a screw and nail system. This method saves time and is faster than drilling large holes in the wall or hammering a stud into it.
You can also use a ceiling joist bracket to hang a cabinet on drywall, but this requires more work and takes up more drywall than a screw and nail system. You can install recessed lights even if you don't have a ceiling bracket or a ceiling joint. However, if you prefer a light fixture that has a clip on its back to replace a bracket and drywall, it will still work.
If you are unsure about which type of recessed lighting fixture to choose or where to place it, make a drawing of the room and bring it with you to the home center or lighting store. You can have a knowledgeable salesperson suggest fixtures that work in your space and fit within your budget.
There are many types of recessed light fixtures available. They can be used for accent, task and general lighting. They are usually placed above a workstation, kitchen island, or reading chair. They can be dimmed or glare free.
When installing a new recessed light, make sure that the hole you cut for it is the correct size. For the right diameter, refer to the user manual or the paper template.
Use a hole saw
If your recessed light requires a circular hole, you'll need a hole saw to make the cut. These attachments allow you to drill a precise hole in the drywall. This ensures that the lighting will fit perfectly and looks great once it is installed. You can also use a compass to mark the hole accurately and a stud finder to ensure you don't cut into a joist.
Once you have cut the hole, insert your recessed light trim inside it and follow the manufacturer's directions. Most trims include coil springs and squeezablerodsprings that hook to the appropriate holes within the light fixture.
Mounting the Light Fixture to Drywall
Mounting the light fixture onto drywall is the final step. The recessed light box has self-clamping holes that fit into the hole. Once the box is in place, you can turn one of its screws to move a plastic anchor against the wall. You can repeat this procedure until the box is flush against the drywall. Once the box is in place, turn the screw to rotate a plastic anchor.
FAQ
Can I rent a dumpster?
To help you get rid of the debris from your home remodeling project, you can hire a dumpster. Renting a dumpster is a great way to keep your yard free from trash and debris.
How long does it usually take to renovate your home?
It all depends on how big the project is and how much time you spend each day. On average, homeowners spend between three and six hours per week working on their project.
How many times should I change my furnace's filter?
The answer depends on how often you expect your family to use your home heating system. It is worth changing your filter more often if you intend to spend a lot of time outside during winter months. However, if you rarely go out of the house, you may be able to wait longer between changes.
The average furnace filter will last approximately three months. This means you should change your furnace filters once every three months.
Check the manufacturer's guidelines for when you should change your filter. While some manufacturers recommend replacing your filter once per heating season, others recommend waiting until there is visible dirt buildup.
What should I do if I want to hire an architect/builder?
It might be easier to have someone else do the work if you're planning on renovating your own house. An architect or builder is a good option if you plan to buy a new house.
Is it better to hire either a general or subcontractor?
It is more expensive to hire a general contractor than to subcontract. General contractors often have many employees and charge clients high labor costs. On the other hand, a subcontractor only hires one employee, so he or she charges less per hour.
What room do I need to remodel first?
The kitchen is the heart of any home. It's where most people spend their time cooking, entertaining and relaxing. If you're looking to make your kitchen more functional, attractive and beautiful, this is the place for you!
Bathrooms are an important part any home. It offers privacy and comfort for daily chores such as washing your hair, brushing your teeth, shaving, or getting ready to go to bed. You can improve the function and appearance of these rooms by adding storage, installing a bathtub instead of a bath, and replacing outdated fixtures with moderner ones.
Can I do the whole renovation myself?
You can do it yourself so why pay someone when you could save time and money?
You may love DIY but there will come a time when you can't do it all by yourself. You might not be able control many of the variables.
If you have an older home, for example, the wiring might be outdated. To ensure safety and reliability, you will need to hire an electrician.
Be aware that structural damage might be too costly for you to repair during the renovation.
In addition, you might not have the tools necessary to complete the job properly. If you want to install a new kitchen faucet, you will need a plumber's serpent, which is a tool that clears clogged pipes.
You must also follow plumbing codes to ensure that a licensed plumber is working on your project.
Let's just say that you must know what you can do before you undertake such a daunting task.
Ask for assistance from family and friends who have completed similar tasks before if you are uncertain.
They can advise you on the steps you should take and where to look for further information.
Statistics
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- They'll usually lend up to 90% of your home's "as-completed" value, but no more than $424,100 in most locales or $636,150 in high-cost areas. (kiplinger.com)
External Links
How To
How to Renovate an Old House?
Let's start by deciding what type of renovations you would like to undertake. This could mean anything from replacing your kitchen appliance to completely redesigning the house.
Once you've decided what sort of renovation you want to carry out, then you need to think about how much money you have available to spend. You may find that your funds are not sufficient to cover the whole project. This could mean that you have to make tough decisions about which parts of your house you can afford and which you cannot.
If you decide that you're going to go ahead and carry out renovations, then there are several things that you need to consider before starting work. It is important to get all permits necessary for your job. You might also need to check whether you need planning permission for certain types or work. To add extensions to your home or make other changes, you might need building consent.
It is a good idea to verify with the local council before you begin work on your house. Check whether you need planning permission to renovate any of the parts of your house. To make sure you have enough coverage, contact your insurance provider if you intend to perform any major works, such as installing new roofs.
Next is choosing the right tools for the job. There are many choices available so make sure to do your research thoroughly. Most people use wallpaper paste, paint, flooring, tiles and carpets for their renovation projects.
When choosing these items, remember to look at the quality of the product. Good quality products will last longer and be more cost-effective. It is important to buy the right amount of anything when buying. Don't purchase too much as it can lead to waste of resources and the need for a lot of material. Instead, purchase only what you need.
Once you've decided on the materials you want to use, you must plan where you'll keep them while you are working on the property. If you're renovating a large area of the house, then you might need to rent storage space in order to keep all your supplies safe until you're ready to put them back inside the house. You might also consider asking family and friends to move your belongings around.