A bathtub's back wall will often have a seam between the tub flange & the backerboard. Caulk is used to seal this seam. However, some areas are not able to be sealed and may need to be patched. You must follow all procedures when installing a tub surround.
Level the tub's rear wall. Before you start installing the tub surround, you'll need to remove the old one. This can be done using a prybar, or a tool like a hammer. Also, be sure to wear protective gear.
Depending on your needs, you can install a tub surround over wood, concrete or tile. These surrounds can be purchased in different styles and colors. Plastic panels or acrylic are the most popular. Each type has its specific installation instructions. Some kits include only a back panel while others include two. Consider purchasing a one-piece surround to keep your costs down.
Once you have removed the original surround, you need to remove all corner panels. Next, measure the new surround and determine its dimensions. It's important to have the right adhesive to ensure it sticks well. It will be necessary to adhere adhesive to multiple areas at once. Allow enough time for the adhesive to dry.
Before you apply the adhesive, mark your walls on the left and right and the top and bottom edges of the surround. This will help you to see where the adhesive should be applied. Be sure to cut the adhesive lines accurately. Masking tape can be used for making the lines visible.
Next, place the back piece of the surround against the wall and adjust the back to be flush. Make sure the entire back is flat against the surface of the drywall. You will need to apply extra adhesive to fill in any gaps if the back is not flat. After applying the adhesive, you'll need to let it dry for at least 24 hours.
Now you can put in the tub surround's rear wall. This is the most straightforward part. But it's a good idea to have a friend hold it in place to keep it steady. You can also place a level on the surface to help guide the installation.
Afterwards, you'll want to attach the flanges to the studs. Predrilled holes should only be used for fasteners. Two to four nailers are recommended for added support. They should be attached to the walls, but not to the wall framing.
Before you start tiling, you will need to install the appropriate vapor barrier. The vapor barrier is a thick, plastic sheet that protects walls from moisture. In addition, you'll need to apply primer and paint. There are many kinds of glue to choose from, so make sure to read the directions carefully.
FAQ
Do I require permits to renovate a house?
Yes. Permits will be required for any home-improvement project. In most cases, you will need a building permit and a plumbing permit. A zoning permit is also required depending on the type and extent of work you are performing.
How much does it take to renovate a home?
Renovations can cost from $5,000 to $50,000. Renovations typically cost homeowners between $10,000 and $20,000
Can I rent a dumpster?
A dumpster can be rented to dispose of your debris after you have completed your home renovation. Renting a dumpster is a great way to keep your yard free from trash and debris.
Statistics
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
External Links
How To
How much money should I spend restoring my old house?
Cost of renovating your house will depend on the number of rooms you want to upgrade, what type of renovations are planned, where you live, as well as whether you hire professional help. The average cost of renovation ranges from $10,000 to $50,000, depending on the size and scope of the project.
You'll probably get less than the market value of your home if you don’t include the cost of repairs, upgrades and other improvements. You might even lose money if you put too little effort into making your home look its best before selling. You can increase the sale price of your home if you spend enough time and effort to improve its appearance.
These are some factors that will help you determine which projects you should start:
-
Your budget. Begin small if your budget is limited. For example, you can tackle one room at a time, such as painting walls or replacing flooring. To make big changes, you can hire a contractor who is skilled in kitchen remodeling.
-
Your priorities. Do you want to improve the overall condition of your home or just fix specific problems? If you decide to address one issue only, remember that small problems can quickly become major ones. You might have to replace your roof sooner than you thought if it leaks each time it rains.
-
Your timeline. You might prioritize projects that will not affect your home's resale price if you are considering buying another property. If you are looking to purchase a new home next year, for example, you might not want to replace your bathroom fixtures or install hardwood floors right away. Instead, you might wait until you move out of your existing home to make those updates.
-
Your skills. You might not have the skills to complete a project. A cabinet maker might be available to help you if your carpentry skills do not allow you to make custom cabinets.