A waterproof membrane might be an option for bathroom remodeling projects. The type of substrate you plan on using will dictate the type and type of membrane you choose. Waterproof membranes protect your home against vapor damage, mildew and mold. These types should be installed according the manufacturer's instructions. You should also make sure that you hire a professional to do the installation.
Cemented board is generally the best substrate for Kerdi membranes. However, you should also be aware that you may need to use greenboard. Traditionally, greenboard was considered the best choice for areas with high moisture levels. Greenboard will eventually experience water damage. Greenboard can be protected by a waterproof membrane.
Kerdi, in addition to being waterproof, is also a vapor retarder. This is vital because it can stop the growth and development of mold and mildew. It can be applied to drywall, cement board, or greenboard. You should clean the surface well before installing the membrane. The surface should be wiped clean with a damp towel. You should then sand the surface to a fine finish.
After the surface has been cleaned, sanded and dried, you can apply the membrane. Apply the membrane with a flat side to your trowel. Apply the material to the back side of the drywall. Make sure you cover all surfaces. Ideally, the membrane should be cut to the desired size. It is best to leave at most 2 inches around each perimeter. Allow the material to dry after you're done.
Next, apply an adhesive layer on the surface. Let the adhesive dry before you add tiles. A second layer of adhesive will help your tiles stick to the surfaces. You should seal any joints with a special sealing adhesive. A second layer of adhesive may also be necessary depending on how the installation is done.
After you've applied the adhesive and allowed it to dry, you can install the Kerdi membrane. Then, you will need to seal the membrane to the wall with Kerdi-Band. Just like any other membrane, it is important to ensure that the edges are perfectly level. Contact a contractor if you have any problems with the application.
Kerdi membranes provide strong, waterproof protection on a wide range of surfaces. They are available as sheets, rolls, or strips. Both sides of the membrane are made of non-woven polypropylene. They are easy and durable to use.
Schluter has many options for bonding Kerdi membranes. The Schluter-KERDI-FIX membrane sealant is a great choice. The silane-modified polymer base is safe for exterior grade plywood. KERDI also can be bonded onto other building elements, like a showerpan or tiled wall.
FAQ
How much does it cost for a house to be renovated?
Renovations are usually between $5,000 and $50,000. Most homeowners spend around $10,000 to $20,000 on renovations.
How do you renovate a house with no money?
When renovating a home without spending money, the following steps should be followed:
-
Plan your budget
-
Find out what materials you need
-
Decide where you want to put them
-
Make a list of things you need to buy
-
Find out how much money your have
-
Plan your renovation project
-
Get started on your plans
-
Do some research online
-
Ask friends and family for help
-
Be creative!
Can I remodel my whole house by myself?
You can do it yourself so why pay someone when you could save time and money?
It doesn't matter how much you love DIY, there are times when you simply cannot do it yourself. There could be too many variables to manage.
For example, if you live in an old home, you might find that the wiring is outdated and you would need to hire a qualified electrician to make sure that your electrical system is safe and reliable.
You also need to consider the fact that you might not be able to handle any kind of structural damage that might occur during the renovation process.
Additionally, you may not have the right tools to complete the job. If you want to install a new kitchen faucet, you will need a plumber's serpent, which is a tool that clears clogged pipes.
You will also need a licensed plumber to work on your plumbing project.
Let's just say that you must know what you can do before you undertake such a daunting task.
Ask your friends and family for help if you're unsure if the job is possible.
They can offer advice about what to do and where to go for more information.
Can you live in a house during renovation?
Yes, I can live in a house while renovating it
Can you live in a house and have renovations ongoing? The answer depends on how long the construction work takes. If the renovation takes less than two months, then you can live in your house while it is being built. You cannot live in the home while renovations are taking place if they last more than 2 months.
You should not live in your house while there is a major building project underway. This is because you could be injured or even killed by falling objects on the construction site. The heavy machinery and noise pollution at the job site can also cause dust and noise pollution.
This is especially true when you live in a multistory house. This is because the vibrations and sound created by construction workers could cause serious damage to your property.
As I mentioned before, while your home is being remodeled, you'll have to manage the inconveniences of living in temporary shelters. You won't have all the amenities of your home.
For example, you will not be able to use your washing machine and dryer while they are undergoing repair. It will be difficult to bear the smell of paint fumes as well the sounds that workers make.
All these factors can result in stress and anxiety within your family. So it is important that you plan ahead so you don't feel overwhelmed by all the circumstances.
When you decide to start renovating your home, it is best to do some research first so that you can avoid making costly mistakes along the way.
Also, it is a good idea to get professional help from a reputable contractor in order for everything to go smoothly.
Is it cheaper to build a new house or remodel an old one?
There are two options available to you if you're considering building a home. You can buy a pre-built house. This type of home can be moved in to immediately after it is built. A custom-built home is another option. You will need to hire a professional builder to help design and construct your dream home.
Cost of building a home is determined by how much time you spend planning and designing it. It will take more effort to build a custom-built home because you'll be required to do most construction work. You also have greater control over the materials and their placement. It may be easier to find a contractor who is skilled in building custom homes.
A new home is typically more expensive than one that has been renovated. That's because you'll pay more for the land and any improvements you make to the property. Additionally, permits and inspections will be required. On average, the difference in price between a new and remodeled house is $10,000 to $20,000.
How can I prevent being scammed when renovating my house
It is important to understand what you are buying to avoid being scammed. Read the fine print before signing any contract. Also, don't sign blank contracts. Always request a copy of any signed contracts.
How long does it take to complete a home renovation?
It depends on the size of the project and the amount of time that you spend each day. The average homeowner spends three to six hours each week working on the project.
Statistics
- According to the National Association of the Remodeling Industry's 2019 remodeling impact report , realtors estimate that homeowners can recover 59% of the cost of a complete kitchen renovation if they sell their home. (bhg.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
External Links
How To
How do I plan a whole-house remodel?
Planning a home remodel takes planning and research. Before you even start your project there are many important things that you need to take into consideration. It is important to determine what type of home improvements you are looking to make. You could choose from different categories such as kitchen, bathroom, bedroom, living room, etc. Once you have decided which category you wish to work in, you will need to determine how much money you have to spend on your project. If you don't have experience with working on houses, it's best to budget at minimum $5,000 per room. You might be able get away with less if you have previous experience.
Once you have established how much you are able to afford, you will have to decide on how big a job to do. You won't be capable of adding a new floor, installing a countertop, or painting the walls if your budget is limited to a small remodel. You can do almost everything if you have enough cash for a full-scale kitchen renovation.
The next step is to find a contractor who specializes in the type of project you want to take on. This will ensure you get quality results and save you a lot of hassle later. Once you have hired a contractor, gather materials and other supplies. It depends on how large your project is, you might need to buy everything made from scratch. However, it is possible to find everything you need in a variety of shops that sell premade items.
Now it's time for you to start planning. You will first need to sketch out an outline of the areas you plan to place appliances and furniture. Then you will design the layout. Make sure that you leave space for plumbing and electrical outlets. It is a good idea to place the most important areas nearest the front door. This will make it easier for visitors to access them. Final touches to your design include choosing the right colors and finishes. Avoid spending too much on your design by sticking to simple, neutral colors and designs.
Now that your plan is complete, it's time you start building! Before you start building, check your local codes. While permits are required in some cities, homeowners can build without one in others. You will need to first remove all walls and floors that are not required for construction. The next step is to lay plywood sheets on your new flooring. Next, nail or screw pieces of wood together to form the frame that will house your cabinets. The frame will be completed when doors and windows are attached.
There will be some finishing touches after you are done. You will likely need to cover exposed wires and pipes. For this, you will use plastic sheeting or tape. You will also need to hang photos and mirrors. You should always keep your work area clean.
These steps will ensure that you have a beautiful and functional home, which will save you tons of money. Now that you have a basic understanding of how to plan a house remodel, it's time to get started.