The backer board may be required to be replaced when you replace shower tiles and drywall. This membrane prevents condensation from building up inside the wall. Without a vapor barrier you can end up with mildew and mold. To handle this job, it's a good idea for you to call a certified specialist.
Start by determining if water damage has occurred. Leakages usually occur where the tile meets a tub or along the wall's bottom. You should also look for signs of mold and mildew. You should also look out for black stains in the shower caulk.
Depending on how old the shower is, you might need to cut tiles to make the base. You can remove tiles easily, but it is best to wear gloves for safety. Large pieces can be pulled with a vacuum-hose attachment. But be careful not damaging it.
The most important part of replacing shower tiles and drywall is to know what you're doing. While a professional can assist you, if you're comfortable doing it yourself you can save lots of money and frustration.
You must use the right material. Fiberboard can be painted to look like drywall. Fiberboard can be placed directly over standard-sized drywall and is waterproof. You can also use greenboard that is resistant to moisture. The paper backing of greenboard is impregnated in waxes, making it slightly more resistant to water than plain drywall.
As you're removing old tiles, drywall, and other debris, check for mold and water leaks. Mold and mildew are signs that your drywall isn't performing well. Once you identify the problem, you are able to start to repair it.
Also, a vapor barrier should be considered. Unlike a conventional drywall, a vapor barrier prevents water vapor from migrating through the backer board and wood wall supports. Install a thinset adhesive, and a waterproof sheets membrane to keep the membrane in place.
You can also remove grout. Although grout is not waterproof, it can be used to fill in the gaps between tiles. You can sand off the grout edges to make the joints smoother after removing the grout. Asbestos can sometimes get into mastic, so be careful.
Laying your tile in a pattern will give you the best results. Begin at the farthest corner, and work your way towards the door. You'd be better off hiring someone who is skilled in tile work.
Using a straight board, you can support the tile while it dries. You should be able to find tile spacers at your local hardware store. It all depends on the size and shape of your shower.
FAQ
What should you consider when buying your next home?
Be sure to have enough money in reserve for closing costs before you purchase a new home. Refinancing your mortgage might be an option if you don’t have enough cash.
Do I need to hire an architect?
It might be easier to have someone else do the work if you're planning on renovating your own house. An architect or builder is a good option if you plan to buy a new house.
How long does it take to complete a home renovation?
It all depends upon the size of your project and how much time it takes. On average, homeowners spend between three and six hours per week working on their project.
How can I prevent being scammed when renovating my house
It is important to understand what you are buying to avoid being scammed. It is important to carefully read all terms and conditions before signing any contract. Also, don't sign blank contracts. Always ask for copies of signed contracts.
Which order should you do your home renovations?
When renovating your home, the first thing to do is decide where everything should go. If you intend to sell your home in the near future, you need to think about how you will present it to potential buyers. The design of your living room, bathroom, and kitchen should be the first thing you think about. After you've decided on the rooms that you wish to renovate, it is time to start searching for contractors who are experts in these areas. Finally, once you have hired a contractor, you should begin working on your renovation project.
Is it better to hire either a general or subcontractor?
Hiring a general contractor is usually more expensive than hiring a subcontractor. General contractors have many employees so often charge their clients a high amount for labor costs. On the other hand, a subcontractor only hires one employee, so he or she charges less per hour.
Is it worth the extra cost to build or remodel a house?
If you're thinking about building a new home, there are two options for you. A pre-built home is another option. This type of home can be moved in to immediately after it is built. You can also build your own home. With this option, you'll need to hire a builder to help you design and build your dream home.
The cost of building a new home depends on how much time and money you spend designing and planning it. Custom homes may take more work as you'll need to complete most of it yourself. But, you also have more control over which materials you choose and where you place them. It might be simpler to find a contractor specializing in building custom homes.
A new home can be more costly than a remodelled home. Because you will need to pay more money for the land and any improvements made to the property, this is why a new home is usually more expensive. Permits and inspections are also required. The average price difference between a new home and one that has been renovated is between $10,000 and $20,000.
Statistics
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
External Links
How To
Do you prefer renovating exterior or interior?
Which one should I first do?
When choosing which project to begin with, there are many things to take into consideration. The most common factor when choosing a project is whether it is old or newly built. It is important to assess the condition of the roof and windows as well as the doors, flooring, and electrical system. There are many aspects to consider when a building is brand new. These include the size and style of the rooms, as well as their location.
If the building is old, the first thing to look at is the roof. You should start the renovation if you feel the roof is at risk of falling apart. You can proceed to the next step if the roof is in good condition. Next, examine the windows. The windows should be inspected for damage or dirt before you do anything else. After this, go through the doorways and make sure that they are clean and free from debris. If everything looks good, you can start to lay the flooring. You want to make sure the flooring is sturdy and solid so it doesn't break no matter how much you walk on it. The next step is to check the walls. You can now examine the walls to check for cracks or damage. If the wall looks good, you can proceed to the next stage. After the walls have been inspected, it is time to inspect the ceiling. Check the ceiling and make sure that it is strong enough to hold up whatever weight you decide to put on it. You can then move on with your renovation if everything looks good.
If the building was new, you will want to inspect the exterior. The exterior of the home should be examined first. Is the house well-maintained? Are there cracks around? Does it look good overall? If it doesn't look good, you need to fix it. Your home shouldn't look shabby. Next, you need to inspect the foundation. Repairing the foundation is a good idea if it appears weak. You should also inspect the driveway. It should be smooth and flat. It should be smooth and flat. If it isn’t, you need to fix it. When checking the driveway, also check the sidewalk. If the sidewalk is uneven, it should be replaced.
Once these areas are checked, you should move on to the inside of the house. Begin by inspecting the kitchen. Are you satisfied with the cleanliness and maintenance of your kitchen? If it is dirty or messy, you need to clean it up. Next, you should inspect the appliances. You want them to be in good order and working correctly. If they aren’t, you need to either get new ones or fix them. The cabinets should be inspected after that. If the cabinets are stained, or have been scratched, you can probably paint them. If they are in good shape, then you can move to the bathroom. You should inspect the toilet here. If it leaks then it's time to replace it. If the item is only dirty, you can wash it. Next, take a look at all of the fixtures. Check that the fixtures are clean. They should be cleaned if they are dirty. Lastly, check the countertops. You should repaint countertops that are cracked or chipped. Use a sealant if they're shiny and smooth.
The final step is to inspect the furniture. Verify that everything is in good condition. If something is missing, then you should probably find it. It is best to repair any broken items. After everything has been checked, you can go outside to finish the job.